Mobil DTE 10 Excel™ 46 demonstrates excellent performance in Husky Plastic Injection Molding Machines*
Reduced unscheduled downtime by4,345 hours
Husky Injection Molding Machines are predominantly used in the manufacturing process. Customer has put in strategy to increase equipment life and increase system efficiency. The plant was seeking a cost-effective lubricant that could improve operational efficiency while reducing total cost.
ExxonMobil Field Engineer presented and recommended Mobil DTE™ 10 Excel 46 - the new generation of hydraulic oils, given its excellent hydraulic efficiency, clean performance with reduced system deposits and a good seal compatibility, with the potential to provide a long component life.
It was agreed to run a field test and examine its performance after 8 months. Upon completion of the field trial, Mobil DTE 10 Excel™ 46 has worked continuously for 4,345 hours.
The customer has positively concluded that the following benefits were obtained with Mobil DTE Excel™ 46:
- no unscheduled downtimes or equipment failures
- optimal and stable consumption of filter elements
- no compatibility issues between the oil and materials of seals and hoses, used in Husky machines.
* This proof of performance is based on the experience of a single customer. Actual results can vary depending upon the type of equipment used and its maintenance, operating conditions and environment, and any prior lubricant used.