Converting to Mobil SHC™ 525 synthetic hydraulic oil helped to improve productivity by 17%

Customer productivity and maintenance cost improvements:

US $5,600,000

Mobil SHC hydraulic oil and bearings


Ceramika Końskie is a Polish ceramic tile manufacturer who uses a Sacmi Imola type PH-3200 Android press in their tile production. The press works under high pressure and operating temperature and the measured hydraulic system temperature was above 100° Celsius. The customer experienced sludge, deposit formation and foaming in the hydraulic system with the prior conventional product. Actual press performance was 10.8 cycles/minute, compared to a design basis of 12.7 cycles/minute. In addition, deposit formation increased unplanned downtime due to filter plugging.


The ExxonMobil engineer recommended Mobil SHC™ 525 synthetic hydraulic oil to improve the press operation due its outstanding high-temperature performance and excellent oxidation resistance. This allowed extension of oil and filter change intervals, while assuring system cleanliness and trouble-free operation.


By converting to Mobil SHC™ 525 synthetic hydraulic oil, the customer reports experiencing up to 17%* improvement in tile press productivity and a 6-hour decrease of unplanned downtime as a result of the extended filter change intervals.

*This proof of performance is based on the experience of a single customer. Actual results can vary depending upon the type of equipment used and its maintenance, operating conditions and environment, and any prior lubricant used.

1601 kb PDF in English


Success stories

  • Industrial piston pump

    Mobil SHC™ 500 Series

    Get up to three times longer protection with Mobil SHC™ 500 Series synthetic hydraulic oils.

    Learn more
  • ExxonMobil solutions boost productivity for Machining Industry

    Manufacturing and machining

    Mobil™ offers proven high performance lubricants and metalworking fluids, supported by experienced representatives and field engineers.

    Learn more