Mobil DTE 932 GT

Premium Gas Turbine Lubricating Oil

Mobil™ DTE 932 GT is a next generation high performance turbine oil designed for use in large frame turbines under severe operating conditions. This product is based on selected high quality base oils carefully balanced with a proprietary additive system to provide long oil life in combination with industry leading "keep clean" performance. The formulations also include a non-zinc antiwear system to meet the load carrying requirements of geared turbines.

 

Mobil DTE 932 GT meets the requirements of modern combustion turbines where the oil is used both as a turbine bearing lubricant as well as for hydraulic controls. Mobil DTE 932 GT is specifically formulated for General Electric Frame 3, 5, 6, 7 and 9 turbines with common bearing and hydraulic oil reservoir, where varnish control is most needed.

 

The carefully balanced combination of base oils and additives is designed to limit the occurrence of varnish formation in the hydraulic system of these turbines. The keep clean performance in combination with a high level of oxidation and thermal stability help provide long and reliable turbine performance.

 

Equipment lubricant recommendations

Our Mobil Serv℠ Product Selector tool will help you identify lubricant(s) for your specific equipment.

Data sheets

Features and Benefits

Mobil DTE brand mineral-based products have been the choice for turbine operators worldwide for more than one hundred years. During that period our company's scientists have maintained the strongest ties with turbine equipment builders and operators to ensure that the needs of new turbine designs are met or exceeded by our lubricants. This has required a continual upgrading of Mobil branded turbine oils and the application of the most appropriate modern base oil and additive technology.

For modern stationary gas turbines operating at high power outputs, exceptional protection against thermal/oxidative degradation and deposit control are key requirements. Severe operation causes thermal stressing of the lubricant that can result in filter plugging, servo valve deposits or short oil life.

Mobil DTE 932 GT oil offers the following features and potential benefits:

 

Features

Advantages and Potential Benefits

Excellent thermal/oxidation stability

Helps reduce downtime leading to more reliable operation

Helps extend oil charge life enabling lower product costs

Reduces varnish formation potential

Reliable turbine operation and helps reduce maintenance of hydraulic system components

Excellent foam control and air release

Quick start up potential, even at lower ambient temperatures

Good electrical conductivity

Helps reduce varnish formation potential leading to reliable turbine operation and helps reduce maintenance of hydraulic system components

 

Applications

Mobil DTE 932 GT is a high performance turbine oil designed for use in gas turbine oil systems, direct- or gear-coupled, and turbine speed control mechanisms. Specific applications include:

     •  Combustion turbine bearing and hydraulic systems in both power generation and mechanical drive configurations

     •  Particularly suited for General Electric frame 6, 7 and 9 applications where varnish control of the hydraulic system is desired

     •  NOT recommended for steam turbine applications.

 

Application Note: Mobil DTE 932 GT is not compatible with Mobil DTE 732. Drain and flush is required when converting.

 

Specifications and Approvals

This product is recommended for use in applications requiring:

GE GEK 101941A

GE GEK 28143B

 

This product meets or exceeds the requirements of:

GE Power GEK32568K

 

Properties and Specifications

Property

Grade

ISO 32

Air Release Time, 50 C, min, ASTM D3427

2

Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130

1B

Density @ 15.6 C, g/ml, ASTM D4052

0.84

Flash Point, Cleveland Open Cup, °C, ASTM D92

240

FZG Load Carrying Capacity, A/8.3/90, DIN 51354-2

10

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

6.1

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

31.5

Pour Point, °C, ASTM D97

-18

Rotating Pressure Vessel Oxidation Test, min, ASTM D2272

900

Rust Characteristics, Procedure B, Rating, ASTM D665

PASS

Turbine Oil Stability Test, Life to 2.0 mg KOH/g, h, ASTM D943

9000+

Viscosity Index, ASTM D2270

141

Foam, Sequence I, Tendency, ml, ASTM D892

20

Foam, Sequence I, Stability, ml, ASTM D892

0

Foam, Sequence II, Tendency, ml, ASTM D892

15

Foam, Sequence II, Stability, ml, ASTM D892

0

Foam, Sequence III, Tendency, ml, ASTM D892

20

Foam, Sequence III, Stability, ml, ASTM D892

0

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx